Similar Posts
Pin base warmer is coming along…
Anthony installed the first pin base warmer on 5.0.2 today. We have to wait until the ALS has LN restored before we can test it. One thing to note: the people we spoke to at NE-CAT about their pin base warmer told us that it does not actually solve the icing issue completely. They still do see pins move on the goniometer after mounting. Hopefully the warmer will help a bit, though!
Tour of the ALS ring
After our last PRT meeting on Nov 4, Steve Rossi took a group on a tour inside the ALS ring to point out the future site of the Gemini insertion device. This month and next are a great time to visit the ALS, since the ring tunnel is open and available for touring.
Where have all the CCDs gone?
During the January shutdown, we decided to test the two Q315R detectors that used to live in beamlines 5.0.1 and 5.0.2. Fortunately, they still work! Once Gemini is commissioned (at the end of this year, if all goes well) then we will have to take the Pilatus out of 5.0.1 and move it over to Gemini. Therefore, good to know that the Q315R is still good. Here it is being tested on the floor at 5.0.1.
It gets worse before it gets better
The robot dewars have been taken off of 502 and 503 in order to replace the motors and perform maintenance on the stages.
