Dectris was here at the ALS during the recent 2-bunch mode, and re-installed two of the modules on the Pilatus detector on beamline 5.0.2. Users may not have noticed, but the detector was previously missing panels on the far edges. These are now in good working order, and several test data sets have been collected successfully.
The Advanced Light Source is planning a major upgrade, which will result in brighter, more coherent beams. The upgrade will occur in 4-5 years, and so now is the time for the biosciences community to define our vision of synchrotron capabilites for biosciences (scattering, diffraction, tomography and IR methods) in the years to come, and…
Anthony installed the first pin base warmer on 5.0.2 today. We have to wait until the ALS has LN restored before we can test it. One thing to note: the people we spoke to at NE-CAT about their pin base warmer told us that it does not actually solve the icing issue completely. They still do see pins move on the goniometer after mounting. Hopefully the warmer will help a bit, though!
Our second User Forum was on March 4, in which we discussed the purchase of a pixel-array detector for beamline 5.0.2. The exciting news since then is that we will be able to purchase a Pilatus 6M for the beamline. Expected delivery is in September of this year.
The third User Forum was on April 2, in which we discussed the diode-beamstop device which the BCSB is developing (allows measurement of flux during data collection), as well as the MiniKappa interlocks on beamline 5.0.2, which will now allow a full 360 rotation of omega (sometimes called Phi) with a maximum kappa angle of 55 degrees.
We are very fortunate to have an outstanding Scientific Advisory Board for the new beamline (“Gemini”) we are building in sector 2 at the ALS. The board members are: Bob Fischetti (APS), Dan Harrington (SSRL), Gwyndaf Evans (Diamond Light Source) and Dan Harrington (SSRL). All of the committee members have extensive experience in building microfocus…
The BCSB is planning on starting a monthly User Forum to solicit feedback from users on the current and future use of the beamlines. We’d love to hear from you about the direction that the BCSB should be taking in terms of beamline upgrades, features, and general operations. If you are interested in participating in the forum, please contact Corie Ralston.
Sadly, today was Charlie Eigenbrot’s last PRT meeting, since he is retiring from Genentech in June. We will miss him! (But we do hope we comes back to visit us periodically at the synchrotron)
