Troubleshooting Guide for Beamline 8 (8.2.2)

Contents

[edit] Beam

BL8.2.2: Beam intensity too low or no diffraction

[edit] Microscope

BL8.2.2: Replace bulb in microscope light

[edit] BOS

BL8.2.2: Collect page all black or blue
BL8.2.2: Software not responding
BL8.2.2: Software won't start
BL8.2.2: Won't write images
BL8.2.2: Snap or run won't complete
BL8.2.2: Energy values jumping
BL8.2.2: Can't set energy or convergence in BOS

[edit] Camera

BL8.2.2: Crystal out of focus
BL8.2.2: Image of crystal not moving or responding slowly

[edit] Heidenhein

BL8.2.X: Heidenhein displays error

[edit] Hutch

BL8.2.2: Collimator won't move
BL8.2.2: Changing or checking cryostream settings
BL8.2.2: Can't see crystal
BL8.2.2: Hutch door won't open

[edit] Computer

BL8.2.2: Computer is frozen

[edit] Data Backup

BL8.2.2: Image files not accessible from PC
BL8.2.2: Cannot find DVD writing software

[edit] Detector

BL8.2.2: Image looks strange
BL8.2.2: Detector won't move
BL8.2.2: Detector image won't show up in BOS

[edit] Fluorescence

BL8.2.2: No fluorescence signal

[edit] Goniometer

BL8.2.2: Goniometer moving slowly or stuck
BL8.2.2: Goniometer keeps moving

[edit] LabVeiw

BL8.2.X: Labview subsystems wont start

[edit] Mono

BL8.2.X: Mono won't change energy
BL8.2.X: Mono reading completely incorrect

[edit] Processing

BL8.2.2: Cannot log on to processing machine
BL8.2.2: Processing error: Directory not writable


[edit] Robot

Robot_Troubleshooting_Guide_for_8.2.2

[edit] Tuneup

BL8.2.X: Iend will not read or stays constant

Retrieved from "http://bcsb.als.lbl.gov/wiki/index.php/Troubleshooting_Guide_for_Beamline_8_%288.2.2%29"

This page has been accessed 4,051 times. This page was last modified 01:56, 10 September 2009.